|
Telephone
|
|
|
|
|
CIVIL WAR ERA |
A very good condition,
honest and complete P-53 Enfield which still has rifling in the bore. The
metal on the gun has a nice, smooth brown with a little freckle. The
ramrod is original, as are the swivels. The lock is marked Potts & Hunt,
London and the left rear of the barrel bears 25 bore London proofs. The
association of Potts & Hunt Enfields with the South is quite strong. Even
so, I don't see any of the typical Southern markings on this gun. There is
one initial, which is a fairly large single letter stamped about an inch and a
quarter below the trigger guard tang on the stock. It looks to be a
capital "D" or perhaps a "G". Click on image for additional
views.
SOLD!!
|
CONFEDERATE |
This old Type III
Fayetteville is coming out of a family straight out of the woods. It has
not been cleaned or monkeyed with since its period of use. It is in a true
"attic" condition with a smooth brown patination. Unfortunately, somebody
sawed the forearm off during its period of use. Everything you see in the
photograph is original Fayetteville, except the ramrod. They even saved
the front barrel band and bent it around the barrel to stabilize the forward
portion of the ramrod. It still has its original bayonet lug for the brass
handled, saber bayonet and the front sight is in place but has modified to suit.
The barrel is still in its original 33 inch length and the bore is dirty and I
don't see rifling. The lock is beautifully marked with the Eagle over CSA,
Fayetteville and 1863. The barrel bears the VP & Eagle Head proofs and the
rear sight slot is open. The butt plate is marked CSA and the wood has its
original rub with numerous dents and dings and a notch cut out of the cone, for
some inexplicable reason. The lock works just fine. The rear band,
trigger guard, butt plate, hammer, etc. are all original Type III Fayetteville
production. The gun is definitely worth straightening out and priced
reasonably. Click on image for additional
views.
SOLD!!
|
SAW HANDLE |
A
very impressive pair of American Saw Handled Dueling Pistols. These
guns have 9 inch barrels with overall lengths of 14 inches. They are
.60 caliber, smooth bore with single set triggers, all of which conforms to
the Code Duello. The barrels are fine twist steel with gold bands and
delicate engraving at the breech. The locks, hammers, trigger guards
and butt caps are all delicately engraved. The locks are marked J.
Cooper and the barrels are marked Joseph Cooper, New York. The ramrods
are German silver tips on ebony with brass ends, mounted with a worm and
cap. The nose caps, wedge escutcheons and butt caps are German silver.
The wood is highly figured with finely checkered grips and retains almost
all of its original finish. The barrels and locks have been lightly
cleaned and there are considerable traces of original blue on the trigger
guards. The tip of the saw handle extension on one gun appears to be
either cracked and put back or replaced. Either way, it was a
masterful job. I have an American figured walnut case, which has no
lining but would properly case these guns. The flask is period and the
scissors mold looks to be about the right caliber. The barrels on
these guns have English proofs on their bottoms. Whether Cooper
imported the guns or just the barrels, I don't know. Nevertheless,
they are American Dueling Pistols of the highest quality, which are hard to
come by. Click on image for additional
views.
SOLD!!
|
PEANUT |
This
is a solid little Henry Deringer which is a little smaller than most of the
Peanuts. The barrel length on this one is 1 1/4 inches with an overall
length of 4 1/2 inches. It is a solid, honest little gun with moderate
pocket wear, in about .41 caliber. It has the deluxe features of a cap box
in the butt and German silver bands at the breech. The action works fine
and it is small enough to be interesting.
Click on image for
additional views.
SOLD!!
|
HENRY DERINGER |
A
solid, very good to fine condition, Philadelphia Henry Deringer with a 2 inch
barrel and an overall length of 6 inches. It is approximately .41 caliber.
The stock is lightly figured and the inlays are of German silver. The
barrel has two German silver bands at the breech and all is typically engraved.
Deringer, Philadela is marked on the lock and the breech along with a "P" and
Sunburst proof. The top of the barrel is correctly marked N. CURRY & BRO.
over SAN FRANCO, CALA over AGENTS. A nice little gun for the price.
Click on image for additional
views.
SOLD!!
|
PRE-PATENT |
This is a very early,
pre-patent Model 1839 Colt Paterson Rifle with a 32 inch barrel ,.52 caliber
smooth bore, and a square back cylinder. This gun would have been produced
in 1838 prior to the issuance of the Model 1839 Revolving Long Arm Patent.
The long barrel and the square back cylinder are extremely rare and if you will
notice in the final photograph, there is no retaining ring on the cylinder pin
to hold the ratchet in place. I have never seen a Model 1839 without that
feature. Normally the retaining ring, which the ratchet bears
against is affixed to the cylinder pin by a screw which fits in a hole, drilled
all the way through the pin. On this gun, there is no retaining ring nor
is there a hole drilled through the cylinder pin to affix it by. The
ratchet is extended further forward than normal, the cylinder pin has a groove
machined in it and there are three set screws which screw into the ratchet
collar that ride in that groove, thus holding the ratchet in place. The
rear of the cylinder has a machined recess, which fits this assembly.
I have never seen this configuration and can only surmise that this gun was
built before the final configuration, which is in the Model 1839 patent
drawings, was worked out. You might say it is sort of a prototype, a
developmental variation. The basic gun is serial number 76. This
number can be found on the lower and upper frame, the ring plate, ratchet,
hammer, upper tang, back of the cylinder and is partially visible on the back of
the barrel. The wedge is serial number 73 and the butt plate is serial
number 82. The fact that these numbers are all so close together tells me
that this gun was probably assembled in this configuration at the factory, to
work out the final design. It is in a nice brown patina with considerable
traces of the original barrel address showing on the right side of the barrel
lug and has very good mechanical function. There may be some very minor
chipping repair on the stock along the upper tang. The gun is an honest,
historic and extremely rare example of a Model 1839 Colt Paterson Revolving Arm. Click on image for additional
views. SOLD!!
|
CONFEDERATE |
A solid, very good
attic condition, Confederate Dixon Nelson Rifle. These guns
were made under contract for the State of Alabama. The contract was for
5,000 guns but the documentation in the Alabama State Archives only
substantiates payment for 645 rifles. Most are 1865 date, manufactured at
Dawson, Georgia. This one is an 1864 date, which might have been
manufactured at Macon, Georgia or possibly at the new plant in Dawson. It
has a 33 inch, .58 caliber barrel which retains its rifling. The stock is
sound and the metal, both brass and iron, is nicely patinaed. The lock is
marked, forward of the hammer, Dixon Nelson & Co. over CS and behind the hammer,
ALA. over 1864. The left rear of the barrel is marked ALA 1864. This
mark is the State of Alabama acceptance mark and was applied to most of
Alabama's contract arms when they were accepted for payment. The sights
and swivels are original. A really nice, honest Dixon Nelson. Price
$25,000. Click on image for additional
views.
SOLD!!
|
HYDE & GOODRICH |
A deluxe Celery Stalk
Finial Henry Deringer which is agent marked Hyde & Goodrich, New Orleans.
The barrel on this gun is about 2 1/4 inches long and in about .44 caliber.
The overall length of the gun is approximately seven inches. The lock is
marked Deringer Philadela as is the breech of the barrel. The barrel is
marked "MANd FOR HYDE & GOODRICH AGENTS NO." This gun is a deluxe version
with Sterling silver mountings, a cap box in the butt and two large gold bands
at the breech of the barrel. It is in fine condition with no repairs or
replacements. Click on image for additional
views.
SOLD!!
|
SOUTHERN DERINGER |
This gun has sold since
our last update but I thought you might like to look at it anyway. It is
in about .40 caliber with an overall length of approximately 6 1/2 inches.
The barrel is marked Schneider & Co, Memphis, Tenn. It is also marked 93
on the breech plug and the number 2 on the tang. There has long been
discussion that these little Memphis marked, spur guard Deringers were actually
made by Bitterlick in Nashville, Tennessee. Whoever made them, they are
very rare and hard to come by. This one is in fine condition with a really
nice look. Price 7,500. Click on image for additional
views. SOLD!!
|
U.S. ISSUE |
This old Army has
certainly seen better days. It only has remnants of markings left on the
barrel and cylinder, no internal parts, no loading lever, etc. Even so,
the barrel, frame, cylinder, back strap, trigger guard and grips, seem to be
original and matching. It is actually a Civil War vintage, U.S. Issue Colt
1860 Army. I thought someone might find a use for it. It would make
a great decorator item for your workshop, just hang it on a nail! It'll
add to the atmosphere of the place. Click on image for additional
views.
SOLD!!
|
CONFEDERATE NAVAL CUTLASS |
This is a superb
example of the Confederate Naval Cutlass which was manufactured by Mole in
England and supplied to the Confederate Navy by Courtney & Tennent, Charleston,
South Carolina. The blade is nice with only minimal staining and a strong
Courtney & Tennent mark. It has an almost perfect leather grip and
is still in its original scabbard with its original buff washer. The
scabbard mounts are virtually undented. The leather is still intact and
solid, with some crazing and cracking in the finish. An exceptionally nice
example of a rare Confederate Naval Cutlass. Click on image for additional
views.
SOLD!!
|
TRANTER'S PATENT |
This is a very rare
80 bore (.36 caliber) Tranter Revolver which is serial number 12302.
It is marked, on top of the barrel "W. Tranter's Patent, Hyde & Goodrich,
Agents for the United States South." It was manufactured about 1860
and marketed by Hyde & Goodrich, New Orleans. The gun is complete and
functioning. It has good checkering on the grips and a light patina
over a relatively smooth surface. It is cased in an American mahogany
casing. The case shows wear but appears to be an authentic period
casing for this gun. It has a correct Tranter's Patent 80 bore bullet
mold., a Hawksley bag flask, an Eley cap tin and a period oiler. Even
the bullets in the case are old. A very rare Southern import revolver. Click on image for additional
views.
SOLD!!
This little Cavalry Carbine by Barnett is virtually new in all respects. It has a 21 inch barrel, .577 caliber bore with three broad lands and grooves, in like new condition. The overall length is 36 1/2 inches. It has swivel link ramrod, brass nose cap, trigger guard, butt plate and escutcheons. It has iron early style barrel bands and fixed sights. The barrel retains 98 per cent plus original blue. The lock assembly retains a like amount of case colors. The wood is sharp with all of its original finish and very minor handling marks. The lock is marked Crown over GR in front of the hammer and the barrel has standard London 25 bore proofs. Barnett's export stamp is clearly marked on the right butt stock. A superb condition little Barnett Cavalry Carbine. Click on image for additional views. SOLD!!
|
MODEL 1842 |
William
Glaze manufactured these model 1842 pattern pistols for the State of South
Carolina in 1853. This gun is a complete Palmetto with the exception of
the lock assembly. The lock has been switched and replaced with a U.S.
Model 1842 Aston. The rest of this gun, to include the rammer assembly,
all the brasses, wood and barrel are original Palmetto production. You
will note the clear Palmetto markings on the barrel and a clear date on the
tang. The links from the rammer assembly are broken but notice the link
screw enters from the right side. This characteristic is only found on the
Palmetto. The U.S. link screw enters from the left. This would
indicate that the rammer assembly and links are truly Palmetto. The wood
is very sound with no major cracks or chips and very light wear. There are
no U. S. sub-inspector marks on any of the brasses, as is correct. Neither
are there any U.S. cartouches on the left side of the stock. A complete
Palmetto Pistol, minus the lock assembly.
Click on image for additional
views.
SOLD!!
|
MODEL 1839 |
The
total production on all variations of the Model 1839 Paterson Carbine is
approximately 950. Of these, about 650 were purchased by either the United
States Government or the Republic of Texas. This gun is the early
production, first type with rounded cylinder. You will note that it does
not incorporate an attached loading lever, rather it has a slot which receives
the loading tool that is carried separately. Also, there is no kickoff
slot on the bottom of the barrel lug, which was used to loosen the friction
between the barrel and the cylinder pin. To quote Norm Flayderman "every
indication is that this is the model purchased by the Republic of Texas, 1839."
This gun is in very good condition having been thoroughly cleaned and has
completely matching serial numbers. The serial number 181 is found on the
back of the barrel, bottom of the barrel wedge, back of the cylinder, rotating
collar and the tip of the buttplate. It is also serial numbered internally
throughout, frame, top strap, etc. The barrel address on the right side of
the barrel, is still visible. It is hard to photograph but it is actually
pretty much complete. I can clearly make out "Patent Arms MG-CO. Paterson
N.J. Colt's Patent." The cylinder is worn but I can still read "Colt's
Patent, Patent Arms Many, Paterson Jersey" which is correct for the lettered
markings. The nipples all appear to be original and the barrel is 24
inches, which is the correct full length. A very historic gun.
Click on image for additional
views.
SOLD!!
|
EARLY CONFEDERATE |
This
is a very early, transition Lemat, which is basically a first model with the
loading lever mounted on the left side. It is actually a very rare
variant. You will note that the barrel is not part octagonal and round but
round throughout its length. This is correct. The completely round
barrel variant is not often seen but is one of the distinct variations in early
Lemats. This gun has matching numbers on the barrel, frame, cylinder,
shotgun barrel, etc. The loading lever and plunger are also numbered but
the ramrod for the shotgun barrel is not and I think it is a replacement.
The gun is well used with numerous dents and dings and a heavy patina. The
barrel address is still visible and reads "Col. Lemat BTE. S. G. D. G. Paris"
The coining is still visible on the front edge of the cylinder and the grips
show wear but are still solid. The action still functions with a few
hiccups here and there. Rifling is still visible in the bore and the gun
has a good look overall. Click on image for
additional views.
SOLD!!
|
CONFEDERATE |
This
old Confederate Fayetteville Rifle is just out of the woods. It has strong
lock markings, barrel markings and a good cartouche. Both barrel bands
bear the proper "U"s and the CSA mark is clearly visible on the buttplate tang.
The iron parts are in a heavy, uncleaned brown patina. The wood is in its
original oil finish with rub and the brasses are all uncleaned nut brown patina.
I don't see a date on top of the barrel. The gun is crusty enough that if
cleaned, one might show up. There is a quarter inch deep chip of wood
missing to the left of the barrel tang and the clean out screw in the bolster is
broken off. The action is good and the swivels are original. There
is moderate pitting around the bolster and some bleaching of the wood behind the
nipple. All in all, it is a pretty sound gun and the bore still has strong
rifling. If somebody wants a decent Fayetteville which might straighten up
a little bit, this would be it.
Click on image for
additional views.
SOLD!!
|
MODEL 1842 MUSKET |
This
is an absolutely, untouched, attic condition, brass mounted Palmetto Musket.
It has strong lock markings with the bushy tree and Palmetto Armory stamped
forward of the hammer and Columbia SC 1852 to the rear. The rear of the
barrel is marked VP Palmetto Tree and WG & Co. The barrel tang and the
butt plate tang are both marked SC. The wood is in its original oil finish
with rub. There is no burnout behind the bolster but there is a small chip
missing to the right of the barrel tang. There is also a piece of wood
broken out beneath and to the rear of the lock plate. You will notice
there is no erosion of the bolster. It is not pitted. The brass
barrel bands are original and in their natural patination. The barrel has
the bayonet lug on the bottom and is really very smooth brown. On the left
side of the stock, below the middle barrel band, it is carved H Brull.
Above the middle barrel band, it is carved 42. The swivels and the ramrod
are original. There is even a piece of an old sling still attached to the
middle barrel band. I have had a lot of these old guns but I think this is
one of the better all around guns with brass mountings that I have had.
Click on image for
additional views.
SOLD!!
|
U. S. ISSUE |
If
you have ever wanted an absolutely untouched Colt Army, straight out of the
woods, this might be it. This gun is from a family in North Georgia.
It was kept in this holster since its period of use. It has never been
cleaned and you can tell when it was put away, it was a pretty nice gun.
There are still small spots of blue peaking out from under the rust on the
rebate of the cylinder. The grips are nice, original, oil finish with
cartouches showing on both sides and a minor chip to the left hand toe.
The action works, cylinder rotates fine but does not lock up. The cylinder
stop spring is broken. The nipples are sharp and the markings are pretty
good. Full barrel address, Colt Patent on the frame with matching serial
numbers on the barrel, frame, trigger guard and backstrap. I can't make
the serial number out on the cylinder but amazingly it still retains liberal
amounts of cylinder scene. The loading lever is rusted stuck but with a
little oil and minor movement, I'm sure it would loosen up. Underneath the
scaly rust, the gun is probably relatively smooth with pretty good pitting out
toward the end of the barrel. The holster is not a US holster with a the
look that might even be Confederate. I don't see any markings on it and it
has worn off toward the end of the barrel. Otherwise it's pretty nice.
An absolutely untouched US Civil War Army manufactured in 1863.
Click on image for
additional views.
SOLD!!
|
U. S. CIVIL WAR |
A
really nice Civil War U. S. Staff & Field Officer's Sword with a blade that is
virtually brand new. The blade is marked on the top Klingenthal, which is
the best of the European blades. The right side of the blade has an
American Eagle above a panoply of arms. The left side has US below E.
Pluribus Unum and above a panoply of arms. The red cloth washer is still
present. The chagrin or sharkskin wrap is perfectly intact with maybe one
minor abrasion. The iron scabbard still retains much of its brown finish
and there seems to be liberal amounts of gold wash on the brass mountings,
especially the guard. A very fine Civil War Staff & Field Officer's Sword
with a nice casting to the guard and pommel.
Click on image for
additional views.
SOLD!!